solar flame SOLO series

Solar Flame SOLO series

Model SOLO is a flat plate collector, encasing harp type absorber with high efficiency level. It is an affordable choice, best suited for closed loop / forced circulation systems, small scale, great choice for mild or hot climates, where its great value will outshine the competition. The efficiency factor of SOLO is η0=0.78 (based on aperture area), making SOLO a remarkable solar collector. This collector has been tested in NSCR DEMOKRITOS laboratory in Greece and is certified with SOLAR KEYMARK.

 

Description:

1. Frame of the collector: Aluminium profile powder coated for maximum protection in seaside areas.

2. Absorbing surface: Aluminium surface with blue titanium high selective treatment with high absorption and low emission (α=95%, ε=4%), laser welded on the copper water frame.

3. Transparent cover: Security-Tempered prismatic solar glass for maximum protection against extreme weather conditions and temperature changes.

4. Header of water frame: Copper tubes Ø22, which are welded to the vertical tubes with hard silver solder. Each water frame is tested at the pressure of 15 bars. Headers are punched with upper expansion for perfect fitting with vertical tubes and minimum pressure drop in the collector.

5. Vertical tubes: Copper tubes in diameter Ø8mm.

6. Thermal insulation: 30mm thick layer of prepressed mineral wool special for solar panels for minimum thermal loss. Thermal conductivity: 0=0.035 W/m°K (EN 13162) and heat capacity 0.84 kJ/kgK.

7. Back cover: Aluzinc 0,4mm thick. Aluzinc stands for aluminium and zinc, fused in almost equal proportions, as a coating for the steel sheet that is coated with a silvery spangle composed of Aluminium (55%), Zinc (43,4%) and a touch of Silicon (1,6%). Great mechanical strength and 7 times more resistant to corrosion than common galvanized steel.

8. Sealing materials: For perfect waterproof finish and proper ventilation of collectors casing, all materials used (EPDM, polyurethane sealant, silicon air vents and silicon header flanges) resist to extreme weather conditions and temperature changes.

The collector can be installed on a flat roof or tiled roof.

Standard solution - with normal shaped headers

A. Row outlet to circulator

B. Parallel connection

C. Series connection

D. Row inlet from circulator

Optional solution - Fast connections kit with special shaped headers

A. Row outlet to circulator

B. Parallel connection

C. Series connection

D. Row inlet from circulator

Steel supports

  • Made of high quality S320 steel

  • Same kit can be placed on flat or sloped roof

  • Standard solution cold rolled galvanized steel. Magnelis treatment, hot dip galvanize treatment or powder painted coating available on request.

1.a One collector on flat roof

1.b One collector on sloped roof

2.a Two collectors on flat roof

2.b Two collectors on sloped roof

3.a Three collectors on flat roof

3.b Three collectors on sloped roof

Aluminum frame supports

  • Rigid aluminum frames

  • Easily adjustable

  • Customized solutions available on request

1.a One collector on flat roof

1.b One collector on sloped roof

2.a Two collectors on flat roof

2.b Two collectors on sloped roof

Model

1.50 V

1.50 H

1.82 V

1.82 H

2.00 V

2.00 H

2.37 V

2.37 H

2.72 V

2.72 H

Gross area [m²]

1.50

1.50

1.82

1.82

2.00

2.00

2.37

2.37

2.72

2.72

Total Dimensions [mm]

L:1480

W:1010

H:86

L:1010

W:1480

H:86

L:1480

W:1230

H:86

L:1230

W:1480

H:86

L:1980

W:1010

H:86

L:1010

W:1980

H:86

L:1930

W:1230

H:86

L:1230

W:1930

H:86

L:2160

W:1260

H:86

L:1260

W:2160

H:86

Weight empty [kg]

24.30

24.70

29.40

29.60

31.80

32.40

37.30

37.80

42.30

43.00

Max. operating Pressure [bar]

10

Thermal Liquid Capacity [lt]

1.17

1.48

1.43

1.59

1.33

1.96

1.61

2.07

1.73

2.21

Collector front Cover-Thickness

LOW IRON TEMPERED GLASS 3.2mm

Insulation

30mm MINERAL WOOL, λ=0.035 [W/(mK)]

Casing Material

ALUMINUM 

Sealing Materials

POLYURETHANE - SILICON - EPDM

Absorber Area [m²]

1.38

1.38

1.72

1.72

1.86

1.86

2.23

2.23

2.57

2.57

Water-frame type/material/diameter

Harp type, copper, ø22 headers-ø8 risers

Nr. Of risers

8

12

10

12

8

16

10

16

10

17

Absorber Material-Treatment

ALUMINUM / PVD COATING / HIGH SELECTIVE – A=0.95±0.02 / e=0.05±0.02

Absorber construction Type

LASER

Heat transfer Medium

 GLYCOL + WATER MIXTURE

Tests and Certifications

SOLAR KEYMARK

EFFICIENCY VALUES BASED ON EN ISO 9806:2013 STANDARD (SKM10086)

Efficiency η0,b

0.74

Thermal loss a1 [w/(m²K) ]

3.73

Thermal loss a2 (w/(m²K² )

0.007

IAM (Κθ at 50°)

0.9

Stagnation temp. [°C]

185

ηcol

57%